Explore The NRA Universe Of Websites

APPEARS IN News Guns

Review: Walther PPQ M2 Pistol

Review: Walther PPQ M2 Pistol

Recently, I’ve worked with a pair of Walther Arms PPQ M2 pistols, one chambered in .40 S&W and the other in 9 mm. According to the included manual, PPQ stands for Police Pistol Quick. Don’t dwell on that name—after the manufacturing department builds a gun, marketing and sales guys get to write a script, and in the case of the PPQs, what they say is a pretty accurate and factual description of the gun’s attributes and capabilities. Like most of today’s duty pistols, the PPQs are recoil-operated, striker-fired semi-automatic pistols with a steel barrel and slide and a high-strength polymer frame.

Whether weaponlight, laser or combination thereof, the standard Picatinny rail will accomodate your accessory needs.

Each Walther PPQ M2 comes with two magazines, which I consider the minimum package for a defensive handgun. If you’re only going to carry a single spare mag and the magazines both work reliably (as they did in the two Walthers), then it’s not essential to buy another. However, so you can rotate loaded magazines—and in keeping with the rule “one is none and two is one”—I would purchase an extra two magazines for any serious self-defense pistol.

Walther offers magazines (called “+2 magazines”) with extended bases providing an extra two rounds of capacity, taking the total round count for the .40 S&W from 11 to 13 (with a round in the chamber). For the 9 mm, capacity goes from 15 to 17 rounds, plus an additional round in the chamber. The magazines have witness holes for an instant count on rounds available, and given the visual contrast between the colored-plastic follower and the brass cartridges, it’s easy to see what you have left to fight with. 


For those who prefer their support hand to wrap around the trigger guard, the PPQ M2 has molded grooves to assist in purchase.

Extremely important in a fighting handgun, the Walther PPQ M2 can be fired with the magazines removed. If you lose or break a magazine—or get surprised in the middle of a tactical reload—you still have the round in the chamber to deal with the situation. The PPQs also came with a magazine-loading tool. If you’ve never been through several days of training with a double-stack-magazine pistol, you may not appreciate this little tool. Trust me, your thumbs will love you for using it.

Immediately noticeable on the Walther PPQ M2 is the accessory rail where you can mount a light or laser. On a duty gun or defensive pistol for home defense, I see no reason not to have a rail. It adds very little weight to the pistol, particularly on a polymer gun. And a light mounted on a handgun provides a huge advantage in a low-light encounter by allowing you to use your standard two-handed shooting grip. The actors in cop shows make it look simple to walk through a building with a light in the support hand held next to the gun, and it is, right up until you fire the first shot. After that, good luck keeping both gun and light trained on your assailant.

Small, medium and large grip inserts ensure the PPQ grip can be custom-tailored to the individual shooter’s hands.

The .40 S&W and the 9 mm both have the same number of serrations at the front and rear of the slide, but the slide on the 5-inch-barreled 9 mm tapered from just in front of the serrations to the muzzle, where- as the slide on the .40 S&W, with its 4-inch barrel, ended just in front of the serrations. Both Walther PPQ M2 pistols have a long, external extractor on the right side of the slide that also functions as a loaded-chamber indicator. With a round in the chamber, the front of the extractor pivots outward, causing the rear of the extractor to pivot into the slide, exposing a red indicator mark in the bottom of the extractor slot. There is a long slide-stop lever on each side of the gun, making things easy for both right- and left-handed shooters. The magazine-release latch was set up for a right-handed shooter on both guns, but it is reversible.

Three backstrap inserts of different sizes come with each Walther PPQ M2. My short fingers prefer the smallest strap, and when it was installed, I was able to hit the magazine-release button with the thumb of my shooting hand without changing my grip—that’s something I can’t do reliably even with my beloved 1911s. The inserts are easily changed by removing a pin from a recess at the lower end of the backstrap. The recess and the pin can also serve as a lanyard loop if you’re so inclined. Just insert a lanyard when switching the straps, and you’ve got a convenient retention device.
 

Taking ambidextrous controls to the next level, the PPQ M2 has both slide-stop and magazine-release levers on both sides of the pistol, making it easy to operate with either hand.


The Walther PPQ M2 is available with either steel or polymer sights, both of which are replaceable. Both front and rear sights are adjustable. Windage adjustments are performed by drifting the rear steel sight left or right, while the plastic sight has a screw permitting click adjustments—specifically one click moving the impact point roughly .75 inch at 25 yards. For elevation changes, different height steel and plastic front-sight blades are available. The plastic sights on the tested guns were equipped with the standard three-white-dot system, and the rear notch on both samples seemed wider than on other pistols I’ve used. This wide notch facilitates faster acquisition of a flash sight picture, which is of course very desirable on a defensive pistol, but it doesn’t help precision shooting, at least for these aging eyes. For that reason, I opted to perform accuracy testing at 50 feet instead of 25 yards. What I really liked about the PPQ sights was the white-dot sight picture shot to the same point of impact as the conventional sight picture. That hasn’t been the case with other guns.

While the sights on the Walther PPQ M2 are not tall, Walther has put a short, vertical face on the front edge of the rear sight. Should you have one hand disabled in a fight, the slide can be manually cycled by hooking the rear sight over the edge of something reasonably solid, like the edge of your shoe heel or the corner of a wall. I did it a few times with both pistols without noticing any marks or damage.

Overall, I like the ergonomics of the PPQ. There are edges where you need them, like the serrations on the slide, the slide-stop levers and the accessory rail, but even these are not aggressively sharp. Grips and backstraps have a rough texture to facilitate control of the gun during rapid fire, but the texture is not so rough to chew your hands up. The pistol felt comfortable in my hands and pointed naturally wherever I looked.

Simple, common takedown procedures reduce the Walther PPQ M2 to its components for cleaning and lubrication.
 

Viewed from the rear, the slide has a trapezoidal shape with the sides sloping in toward the top. I prefer parallel sides on a pistol with heavy recoil springs, because it’s easier to manually cycle the slide. My hands tend to slip off the slide toward the narrower dimension, in this case the top of the slide. Occasional minor bouts of arthritis make me a bit fussier about this shape than most shooters, but even for me it’s really not a big deal, although I found the slide shape slightly more aggravating on the .40 S&W than on the 9 mm.

The forward serrations on the Walther PPQ M2 help greatly in maintaining a grip during a chamber check. The trigger guard is slightly relieved where it joins the frame to assist getting your shooting hand as high into the gun as possible and minimizing shot-to-shot recovery time. While recoil is not a major factor on the 9 mm, the sharper recoil impulse of the .40 S&W—particularly in a lightweight polymer handgun—is where this feature will be most appreciated.

I’m not at all ambivalent about the forward hook of the trigger guard—I just don’t like it. Since I don’t shoot with my support hand in front of the trigger guard, I see no need for it.

Takedown procedures for the Walther PPQ M2 are pretty simple, just be very careful not to put any part of either hand in front of the muzzle. Make sure the pistol is empty before disassembly.

“PPQ” is shorthand for Police Pistol Quick, which the handgun proved to be in testing.

Like some other striker-fired, polymer pistols on the market, Walther PPQ M2 pistols have a trigger safety system consisting of a thin, pivoting lever centered in the face of the trigger. The pistol cannot be fired until the safety lever is fully depressed into the slot in the trigger. No additional thought is required by the shooter to take the safety off—simply putting your finger on the trigger and applying pressure disengages the safety and fires the pistol. When the gun is cocked, it’s ready to fire. What does require some extra thought is to always keep your finger off the trigger until you want to shoot, but that is a standard safety protocol with all firearms.

When you decide to fire that first shot, you’ll really begin to appreciate the Walther PPQ M2. After the trigger slack is taken up (which requires about .2 inches of trigger travel), the 9 mm required just more than 5 pounds of pressure to fire, while the .40 S&W required less than a 4.5-pound pull. The triggers on both guns moved another .4 inches while that pressure was applied for a total travel distance of .6 inches.

But it’s when you fire the rest of the rounds in the magazine that the real love affair starts with the Walther PPQ M2. The triggers on both pistols reset with less than .2 inches of forward travel, so on subsequent shots, the trigger moves less than .2 inches, while requiring the original 5 pounds or less pressure to fire. If you’re a trigger slapper, you’ll be back to the long trigger pull of .6 inches experienced on the first shot. The good news is each shot will still require only 5 pounds pressure.

Mastering the short, trigger reset technique is difficult enough on a square range when fighting paper targets. It gets even tougher when you go through a shoot house. In a real-life scenario where live rounds might be coming at you, your sphincter will be fluttering like a hummingbird and your trigger-slap technique will return with a vengeance. Unless you’re a highly trained ninja, life-threatening situations like a gunfight tend to produce panic and restore bad habits.

Walther’s manual says the Walther PPQ M2 can handle +P loads, but such loads will accelerate wear and dictate more frequent maintenance. The manual also says that +P+ ammunition should not be used, and the guns should be cleaned prior to their first firing. I heeded the instructions regarding ammo, but ignored the initial cleaning. In the first four magazines I put through the pistols, there were two failures to extract. After that, things settled down and there were no further malfunctions with either +P or standard-pressure ammunition during testing. I score that as two failures for the gunwriter, zero failures for the PPQs.

I mentioned that I performed testing at 50 feet rather than 25 yards because the wide rear sights seemed to be made for quick acquisition rather than precision shooting. Perhaps that’s why the word “quick” is included in the PPQ name. I used the leftover ammo in a 50 yard duel with an 8-inch falling-plate target. Seated in the same armrest position as used in the group testing, the plates were hit with 30 to 40 percent of the shots. Precision repeatability with the Walthers may be beyond my visual capability, but the guns are capable of longer-range shots should such be warranted.

Fast at close range and capable of decisive hits at longer ranges, the Walther PPQ M2 is a well-built handgun. Include these capabilities in a lightweight, easy-to-shoot pistol, and you have a self-defense sidearm worthy of serious consideration.

Comments On This Article

More Like This From Around The NRA