What's Wrong With the Hi Power?

by
posted on March 20, 2015
browninghipower.jpg

The Browning Hi Power is one of the most prolific fighting pistols of all time. I've owned several, but for a variety of reasons could never hold on to one very long. Like John Browning's other, more famous, pistol—the 1911—the Hi Power needs a bit of tweaking from its original configuration to be optimal for modern self-defense. With a stable full of modern 1911s, I've just never managed to take the time or money to get the work done.

What are the problems with the Hi Power? For starters it has a magazine disconnect. This means the pistol will not fire if a magazine is not fully inserted. Some consider this a plausible safety feature, arguing if you are wrestling with a bad guy for control of your pistol, you can depress the magazine-release button and, well, just let him have it.

The other side of the argument is if, for whatever reason, during a struggle the magazine-release button gets depressed and the magazine is partially ejected or falls from the pistol, your gun is rendered useless. For what it's worth, the magazine-disconnect button on the Hi Power was part of its original design criteria and is one of the reasons some Hi Power magazines do not drop free.

At any rate, no matter your take on the magazine disconnect, one thing is for sure: It makes the Browning Hi Power's trigger atrocious. The good news is it's a relatively easy fix to disable the magazine disconnect.

Another problem with the Hi Power is the short tang and long hammer spur, which combined give the pistol a tendency to bite the hand that shoots it. This is particularly a problem if you are accustomed to a high grip, like most competent shooters use. Fixing the Hi Power's overbite problem is a bit more involved. No, you won't need an orthodontist, but you will need a new hammer.

Fortunately, a savvy pistolsmith, a spring kit and the aforementioned hammer can correct both the bite and magazine-disconnect problems at the same time, and it will not cost nearly as much as a set of braces.

The third problem with the pistol is the ambidextrous safety. If you are right handed and shoot with a high grip, the bulbous end of the safety on the right side of the pistol—where the pin for the safety passes through the frame—will wear into your knuckle like in-laws on Christmas. You're probably thinking that, like many gunwriters, this Mann guy is a wimp. Maybe so. But, with so many comfortable pistols on the market, why would anyone shoot one that isn't? The good news is this safety is also an easy fix for a gunsmith.

Finally, there are the sights. From a sight-picture standpoint, Hi Power sights—even the early ones—are better than original 1911 sights. For some unfathomable reason, however, factory Hi Power sights have never evolved into the new millennium. As a matter of fact, they have never really evolved at all. The lone exception was the Hi Power clone offered by Charles Daly a few years back. It came with XS Sight Systems' Big Dot sights. Here again, it is simple for a gunsmith to replace the factory sights with better options.

So, with everything wrong with a Browning Hi Power, you might be thinking: "Why mess with one at all?" Well, with very few exceptions, the Hi Power is the only true single-action 9 mm available. It's also one of the most reliable pistols in any configuration, and field-stripping and assembly are as simple as it gets. The Hi Power's grip might also be the most ergonomic of any handgun. Slim, trim and just about the perfect weight for carry, the Hi Power is almost perfectly balanced, with the barrel and slide weighing within an ounce of the frame. This, in conjunction with the grip, makes the Hi Power one of the easiest-shooting, easiest-to-control 9 mm pistols in the world.

Nuff said.

I finally decided it was time to permanently add a Hi Power to my arsenal—one that had been fixed. Robbie Barrkman at Robar told me he could build a Hi Power I'd like so much, I'd want to be buried with it. Did he deliver? Check out "High-Class Hi Power" in the April 2013 issue of Shooting Illustrated and see for yourself. 

Latest

gas pedal
gas pedal

The Gas Pedal Drill

Training yourself to shoot better is the result of developing a higher skill level upon which you may rely. The higher your skill level, the greater your odds of performing well when they are called upon. Greater skill is born from greater control; the greater the control, the better the performance.

First Look: New Products from Gemtech

Including the company's first-ever AR-15 pattern upper receiver.

First Look: Buck Knives Alpha Scout Knife

A great companion for your next outdoor adventure.

Dead Air Silencers Opens New World Headquarters

The new plant in Utah is needed due to increased demand.

Your Go-To Move

When it comes to a self-defense situation, most shooters think “Well, I’ll just shoot him!” Others may consider their personal “go-to” move to be a martial arts technique such as a finger strike to the eyes, bare-knuckle punch to the throat or kick to the groin.

First Look: Armasight Contractor 640 Optics

Available in 2.3-9.2x35mm, 3-12x50mm and 4.8-19.2x75mm versions.

Interests



Get the best of Shooting Illustrated delivered to your inbox.