iPhone,apps,app store,Nikon,Spot On,ballistic calculator,shooting apps

Nikon Spot-On

Here's an easy-to-use ballistic calculator that makes hitting distant targets simple.

By Richard Mann (RSS)
September 15, 2011

The best way to learn the trajectory of your bullet is to shoot at long range. That’s not an easy option for many shooters, so we rely on ballistic reticles, drop charts or ballistic software to help us reach out and get hits. Exterior ballistics—the flight of the bullet between barrel and target—is just a physics problem. Yes, it’s a complicated physics problem, but there’s always a mathematical solution. Nikon has simplified this math problem so anyone can work it.


The Nikon Spot-On program is an Internet-based external ballistic calculator. It does several things common to most ballistic calculators. It also does some additional things that allow shooters to apply the calculations to their specific Nikon riflescope.

One problem many shooters have when working with ballistic programs is obtaining the muzzle velocity of a particular load and the ballistic coefficient (BC) of the bullet used. The BCs for most every bullet and the muzzle velocities for almost all currently manufactured ammunition are already integrated into the Nikon Spot-On program. You don’t have to go look them up.

Nikon,Spot On,software,ballistic calculator,website

The Nikon Spot-On external ballistics calculator is well thought out and easy to use on your computer or your smartphone. It takes Nikon’s BDC reticle to the next level.

First, log on to the Nikon Spot-On website. You can view tutorials or go right to the calculator. The program provides trajectory data you can use with any riflescope, but is custom tailored to work with Nikon’s products. If you have a Nikon riflescope the first thing you need to do is select your scope. To illustrate how this program works, I mounted a Nikon 2-8×32 mm scope with the company’s BDC reticle on my Smith & Wesson M&P15-22 and chose that option.

Selecting your ammunition is the next step. Factory-advertised velocities are provided, but ideally you should input the exact velocity—an average velocity obtained with a chronograph. This is precisely what I did using CCI Velocitor ammo. CCI’s advertised velocity was 1,435 fps, but the actual, average velocity from my rifle was 1,410 fps.

Nikon,Spot On,ballistic calculator,atmospheric conditions,wind speed,temperature,altitude

When inputting your data, you’ll need to include the atmospheric and wind conditions as well as the angle of the shot. The Spot-On program has a separate screen just for that.

Next, enter the appropriate atmospheric and wind conditions. This is relatively easy to obtain by checking the weather on your computer or your smartphone. (More on smartphones later.) You might have to guess the actual wind direction and speed at your location. Now, you’re ready to look at the trajectory data and go shoot.

There are several ways the data can be viewed. You can view a field-reference ballistic chart, a ballistic table or a ballistic graph. The information can encompass everything from drop, wind drift, downrange energy and velocity—even time of flight. These charts or graphs can be printed, exported to Excel or even turned into an Adobe PDF document.

Nikon,BDC reticle,Spot On,ballistic calculator,holdover,aiming points,riflescope,long range

To maximize the versatility of your Nikon BDC reticle, the Spot-On program has a feature that lets you expand the BDC data. Use this if you want to work with multiple aiming points and better fine-tune your long range shooting.

The Spot-On program also correlates trajectory data to the additional aiming points on Nikon scopes with BDC reticles. It tells you at what range each point will correspond to the bullet’s trajectory. Each BDC circle actually offers three aiming points; top, center and bottom. By clicking the “Expand BDC Circles” button, you can see the range to which each point correlates. Further fine tuning can be achieved by changing scope magnification.

With the printed results—based on a 25-yard zero—in hand, I stepped out to my range and zeroed the M&P15-22 at 25 yards. As directed by the Spot-On program, I then fired at a 100-yard target using the center of the first circle as an aiming point. The five-shot group impacted the target spot-nn, pun intended. I also checked the combination at 150 yards. The program told me the bottom of the third circle would correspond to 149 yards, so that was the aiming point I used. The group opened to almost 3 inches, but was about as close to center as practical.

This system works just as well with centerfire cartridges. Last year I used my custom .308 Win. Sisk Civilian Sniper Rifle on a Wyoming mule deer hunt. It was topped with a Nikon Monarch 2.5-10×42 mm riflescope with a BDC reticle. I was using Nosler Custom ammunition, and prior to the hunt ran the combination through the Spot-On program. My shot came at 329 yards on a grand old buck. I’d memorized the drop data, but also made a cheat sheet and taped it to the rifle’s stock. Using the bottom of the second circle as an aiming point, one shot was all it took.

What if you handload or shoot a new cartridge not cataloged in the Spot-On program? Not a problem. The only cartridge-specific data you need is the muzzle velocity and bullet BC. There is even a section in the program to record handload data.

Case in point; I’ve been shooting the Wilson Combat 7.62×40 WT cartridge a lot. This is a .223 Rem. case necked up to .30 caliber. By inputting the chronographed velocity of the Wilson Combat ammo and the BC of the 125-grain Nosler Ballistic Tip bullet into the Spot-On program, I found the data provided was accurate out to 300 yards, which was as far as I checked it.

There are two other neat Spot-On features. The program will tell you how many clicks are needed to adjust the point of aim of any Nikon scope at the range you are shooting. And, what some folks do not realize is with a standard Nikoplex reticle you can use the taper point on the bottom vertical stadia wire as an additional aiming point—kind of like a makeshift BDC reticle. The Spot On program will tell you at what range this point coincides with your load’s trajectory, and you can fine tune this range by altering the magnification, by the distance at which you zero your rifle or both.

apps,iPhone,smartphone,app store,Nikon,Spot On,ballistic calculator

Whether you use your computer or your smartphone, the Nikon Spot-On program is a great way to obtain external ballistic data.

Remember, I said we’d get back to the smartphones? There’s an app for the iPhone and one soon to come for Android phones. When I worked the Spot-On calculations for the 7.62×40 WT, I used my iPhone. The data was double-checked with my computer and it was exact. Smartphones also make it really easy to obtain atmospheric conditions. Just tap the “current conditions” button, and the iPhone does the rest. Apps are also available to give you your current elevation.

Nikon has always made great scopes, and the Spot-On program, which is as neat as a pillow that is always cool on both sides, has made them even better. This is especially true for those wanting to reach out and touch something with a bullet. Keep it in mind when you are looking to purchase your next riflescope.

Tags: , , , , , ,


11 Responses to Nikon Spot-On

  1. Pingback: Nikon Spot-On | Shooting Illustrated | Front Sight Productions | Scoop.it

  2. Pingback: Nikon’s Spot On App Now Available For Android | Shooting Illustrated

  3. curtis wolff says:


  4. k Jones says:

    Is the nikon spot on app available for black berrys yet.

  5. Pingback: New Nikon Scopes for ARs | Shooting Illustrated

  6. Pingback: No More Hold-Over | EMPTY CASES

  7. roger says:

    Very accurate upto 450 yards with my 270.

  8. Bryce Bogue says:

    unable to open yor website—i have tw0i buckmasters bdc reticule to calculate==please advise

  9. jw says:

    Why does the yardage change when the power of the scope changes? If you shoot your shotgun in at 100 yards on 9 power with the slugger 3×9. Check the spot on system at 3 power gives you different yartages.

  10. Bill riddle says:

    I have just purchased a 20 gauge savage slug gun an a nikon sluger 200 bdc the bullet i used was remington accu tip bonded an the box says 1900 fps. The infr that came with scop said to site it in at 50 yds an it should be on all the way to 200 so i sited it at 50yds an then shot 100 an was about 4 inches hi. I used 3 power at 50 yds an 9 on 100 is that the problem an y would it be i thought that each circle under the cross hairs should be on at the yardage it say for instance the first circle should be on for 100 an so on. What should i do to get it sighted in

Leave a Reply

Your email address will not be published. Required fields are marked *


You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>